Party Time

Features & details
Party Time

Features

• Free standing, no pegging necessary
  
• Easy to erect
  
• No tools necessary
  
• Can be used on hard or soft standing
  
• Easy to transport, will fit into the back f a car/hatchback
  
• Can be used with or without wall panels
  
• Doorways can be created wherever required
  
• All side panels are individually fitted by simple lacing mechanism

  
  Fabric

• 480gsm PVC coated polyester
  
• Fire retardant to M2 and BS 5438
  
• Lacquer finish for easy care and good looks
  
• Ultra violet stabilised to prevent the material stretching or fading in hot weather and cracking in freezing conditions
  
• Anti fungicide treated to prevent fungus spores forming if the tent is left folded when wet for any length of time
  
• Champagne coloured PVC and bound in green as standard

  Frame

• 32mm x 1.5 mm gold passivate electro plated steel tubular frame
  
• Welded and reinforced angles
  
• Only two different angles used (3 way and 4 way)
  
• All roof poles same length and interchangeable
  
• All legs same length
  
• No spring clips, nuts or bolts
  

  Options

• Crystal window panes
  
• Plain fabric panels
  
• Zipped door fire exit panels
  

  Extras

• Groundrails for holding down wall panels on hard standing
  Linings, Walkways and Jointers
  

Dutch lacing the window panels in place, it couldn’t be easier.

The cover simply hooks to the foot of the frame. The foot can be pegged to the ground.

The frame simply slots together, no tools required.

Stage one: Layout the roof section poles approx. where you require the marquee to stand. Slot the roof sections together and lay out the legs ready to be slotted into the roof sections.

Stage two:Roll out the roof over the frame.

Stage Three: Make sure the corners of the cover match the corners of the frame and slot into legs. Once one side is completed, move to the other side and repeat.

Stage Four: When the frame and cover are lifted to the full height, the marquee can be repositioned to its final location. Then, simply hook the canvass to the feet and then add windows and doors as you require.